ABEVE
Albrigi Red Fermenting Tank| Enlarge
  • |
  • |
  • |
  • Dimple Plate on floor of tank|
  • Fermenter Door open|
  • Irrigator flyjet |
  • Irrigator auto jet in action |
  • Large top manway to aid cap management|
  • Fixed Plunger|
  • Sweeping Arm marc removal|
  • |

Albrigi Red Fermenting Tanks: Closed Top and VC types

Vinification Tanks with a Sloping or Flat Floor for red fermentation and storage available with

a Closed Top conical roof featuring a manway of 400 up to 800mm or

as a Variable Capacity (VC) using a flotating lid system

 Capacities: 2,000 to 20,000 litres can fit within standard shipping containers; larger units available upon request.

 Features:

  • Standard tanks built in 304 Aisi Stainless Steel with the usual mirror finish inside (BA) and rolled/polished welds of Albrigi tanks. This ensures an easy and high clean tank suitable for the modern winery.
  • 10° Conical Roof with 100mm neck (chimney) for the manway that can be positioned centrally or off-set.
  • 400mm sealing manway with locking pin and pvc breather; other diameter manways also available: 600, 800, 1000mm
  • Conversely a s/steel floating lid (VC) system using an inflatible tube can be supplied allowing the tank to operate as an open fermenter if required.  
  • 5° Sloping or Flat Floor are standard configurations; greater sloping floors also availableRacking and Drainage outlets with S/Steel Ball Valves or Butterfly Valves 50mm or 75mm with BSM, Tri-Clover available
  • Rectangle Door positioned at the bottom of the sloping floor
  • Pockets for Thermometer and also Temperature Probe
  • Ladder Rest and Lifting Points
  • Sample Tap
  • 400mm welded legs are standard, but other sizes are available 

Options:

  • Dimple Plate (Cooling/Heating Jacket) wide available in horizontal or vertical strips.
  • Thermometer
  • 30° Sloping Floor to the front edge of the door.
  • 600mm, 800mm or 1000mm diameter manways at the top of the tank
  • S/Steel 600mm, 750mm or 1000mm welded legs.
  • Vertical Pipe with valve to aid pump overs
  • Irrigator
  • Pneumatic Plunger
  • Oval Racking Door
  • Inert Gas Injection system
  • Volume Indicator either open or closed loop
  • Adjustable feet
  • Cooling Tube around the top manway
  • Micro-Oxygenation system
  • 80mm Insulation with S/Steel Cladding over the dimple plates or the whole tank
  • Mirror Polished, Scotch Brite or Satin S/Steel Finish other than the Embossed standard

 


TOP